[L Shape Plastic Folder] 01. L Shape Plastic Folder Artwork Specification

You are here:
< Back

L Shape Plastic Folder Artwork Specification

BLEEDING & SAFE ZONE

Bleeding : 2mm from all edge.

 

Safe Zone : 5mm for top, left & right edges. While 10mm for bottom edge.

 

ARTWORK PRECAUTION

Folding Tolerance : +-1mm
Recommend to use same background colour while prepare artwork to avoid colour overlap onto other page after folding.

 

IMPORTANT: PLEASE AVOID YOUR ARTWORK CONTAIN DESIGN OR LAYOUT AS BELOW:

1. Different Colour Background

IMPORTANT: PLEASE AVOID YOUR ARTWORK CONTAIN DESIGN OR LAYOUT AS BELOW:

2. Background artwork with stripe design

 

3. Extended graphic on the folding line

REMARK: PRINTBOXER WILL NOT HELD ANY RESPONSIBILITY IN THE CIRCUMSTANCES SHOWN AS ABOVE.

SUBMIT ARTWORK FOR L-SHAPE PLASTIC FOLDER FILE

 

IMPORTANT NOTES IN PREPARING WHITE BASE ARTWORK

-Fill the artwork with black (K100) to indicate the area for white base.

-Rename colour to precisely “ White” to indicate the area of white base instead “WHITE” or “white” *Printboxer will not held responsibility on any wrong white spot colour naming error. (eg. “WHITE” or “white” or “White(space)” )

-Only use Adobe Illustrator to prepare the white base artwork.
-JPEG file format or JPEG save in PDF format is not allowed while prepare white based artwork.
-White based artwork must prepare in VECTOR

Rename the color swatch name by using Adobe Illustrator

 

STANDARD CHECKLIST :

COLOUR

-Use ONLY CMYK colour mode in your artwork
-No colour tints (toning) lower than 10%
-Do not set black colour to (C=100 M= 100 Y= 100 K= 100)
-Make sure the value between colours are at least 10% of different. (Tint / toning effect more obvious)

LINE

-Line weight not less than 0.25points (Not applicable for Pre-Inked stamp,spot UV,Hot Stamping)

IMAGES

-All images are in CMYK colour mode
-Resolution of all images are set to or above 300dpi.
-Scanned line Art/Black & White images resolution are set to or above 1200dpi.
-Do not manipulate images using a layout program

TEXT

-No font less than 4points
-Curve / Path / Create outline all fonts

ARTWORK

-Artwork is prepared in our Product Size Templates
-Background design expand to Full Bleed size
-No crop mark are applied
-Ensure artwork orientation

DESIGN

-All images have been exported / converted : Background, design effects, photos, images to TIFF files (not including text / vector images)
-Never manipulate images in layout program resolution: 300 dpi
-Color Mode: CMYK color mode

FILE FORMAT

-Artwork is saved in required file format : Adobe acrobat Document 4 – Ver 1.3 (*.pdf)
-Resolution: 300 dpi
-Color Mode: CMYK color mode

FILE NAME

-abc_f

MARKING & TRAPPING

-Never apply any crop mark or trapping onto the files.